Master HPE7-A03 Exam with Reliable Practice Questions
Upgrade to Premium
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services
The client decided that they would like to manage two wiring closets as a single stack with a total of 10 switches and a minimum transport speed or ?5Gbps over 0M4 MM Tiber They would also like to keep the stacking cabling cost to a minimum.
Which switch series would most economically accomplish these requirements?
Correct : B
The Aruba 6300F Switch Series is designed to meet the needs of modern, full-stack wired and wireless networks with a focus on cost-effectiveness, performance, and scalability. This series supports high-speed connectivity options, including 25Gbps over OM4 MM fiber, making it suitable for the client's requirement to manage two wiring closets as a single stack with a total of 10 switches. The 6300F series also offers the flexibility of modular uplinks and stacking capabilities, ensuring that the client's needs for minimum transport speed and economic efficiency are met. Additionally, the Aruba 6300F series is known for its energy efficiency and lower operational costs, further contributing to its economic value.
Start a Discussions
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network Infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be In use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services.
The client has decided that more critical switch stacks supporting Contact Center resources will need to support greater than 600W of CL4 PoE and have redundant power supplies These stacks will have approximately six members.
What would be the most economical choice Aruba switch series to meet these requirements?
Correct : C
The Aruba CX 6300F Switch Series is well-suited for environments requiring high PoE power and redundancy in power supplies, especially for critical applications like supporting contact center resources. This series offers robust PoE capabilities, often exceeding 600W of Class 4 PoE power, making it ideal for powering multiple high-powered devices. Additionally, the Aruba CX 6300F supports stack configurations and redundant power supplies, ensuring high availability and reliability for critical network infrastructures. Its economical pricing, combined with high performance and reliability, makes it the most cost-effective choice for the client's requirements.
Start a Discussions
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services
The client would like 10 include Blue Dot location tracking in their four floors of corporate space. The APs are not Ideally placed to allow for smooth map transitions.
What could you add lo provide better tracking? (Select two.)
Correct : B, C
For improving Blue Dot location tracking in corporate spaces where access points (APs) are not ideally placed for smooth map transitions, adding more APs and deploying beacons are effective strategies. More APs can enhance the density and coverage of the Wi-Fi network, providing more data points for more accurate location tracking. Beacons, specifically designed for precise indoor positioning, can supplement Wi-Fi-based location services by broadcasting signals that mobile devices can use to determine their location with greater accuracy. This combination ensures better tracking and smoother map transitions within the corporate space, enhancing the overall effectiveness of the Blue Dot location tracking solution.
Start a Discussions
ACME retail has 38 locations spread out across Ave US states and two provinces in Canad
a. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (Ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
ACME Retail is using 4-post racks. Which rack mounting kit is better suited for this project?
Correct : B
For a large multinational retail company like ACME Retail that uses 4-post racks in their network infrastructure, the most suitable rack mounting kit would be the optional Aruba Universal 4-post Rack Mount Kit. This kit is designed to provide a secure and stable mounting solution for networking equipment in 4-post rack systems, which are commonly used in enterprise environments for their robustness and ability to support heavier equipment. The Aruba Universal 4-post Rack Mount Kit is versatile and designed to fit a wide range of Aruba switches and networking devices, making it an ideal choice for ACME Retail's project, ensuring compatibility and ease of installation across their various locations.
Start a Discussions
ACME retail has 38 locations spread out across Ave US states and two provinces in Canad
a. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Based on the best practices and customer requirements, what is the correct WLAN approach?
Correct : B
For ACME Retail, which has multiple locations and a mix of environments including high-ceiling warehouses and retail spaces, an Aruba Instant OS 8 deployment is a suitable WLAN approach. Aruba Instant OS provides a controller-less architecture, which simplifies the deployment and management of the wireless network, especially across multiple sites. This approach enables ACME Retail to manage their entire wireless network from a single interface without the need for dedicated hardware controllers, reducing costs and complexity. Instant OS also supports advanced features like Adaptive Radio Management and ClientMatch to ensure optimal performance in diverse environments, making it an effective solution for ACME's varied locations and requirements.
Start a Discussions