Master Fortinet NSE7_EFW-7.2 Exam with Reliable Practice Questions

Correct : B

To reduce the number of BGP sessions in an IBGP network, you can use a route reflector, which acts as a focal point for IBGP sessions and readvertises the prefixes to all other peers. To configure a route reflector, you need to enable the route-reflector-client option on the neighbor-group settings of the hub device. This will make the hub device act as a route reflector server and the other devices as route reflector clients.Reference: Route exchange | FortiGate / FortiOS 7.2.0 - Fortinet Documentation

Correct : A

In an active-active load balancing scenario, when the primary FortiGate forwards the SYN packet to the secondary FortiGate, the destination MAC address would be the secondary's physical MAC on port1, as the packet is being sent over the network and the physical MAC is used for layer 2 transmissions.

Correct : B, D

IKE version 2 supports the extensible authentication protocol (EAP), which allows for more flexible and secure authentication methods1.IKE version 2 also exchanges a minimum of four messages to establish a secure tunnel, which is more efficient than IKE version 12.Reference: =IKE settings | FortiClient 7.2.2 - Fortinet Documentation,Technical Tip: How to configure IKE version 1 or 2 ... - Fortinet Community

Correct : D

Network processors (NPs) are specialized hardware within FortiGate devices that accelerate certain security functions. One of the primary functions of NPs is to provide IPS signature matching (B), allowing for high-speed inspection of traffic against a database of known threat signatures.

Correct : B, D

The neighbor-group command in FortiOS allows for the application of common settings to a group of neighbors in OSPF, and can also be used to simplify configuration by applying common settings to both IBGP and EBGP neighbors. This grouping functionality is a part of the FortiOS CLI and is documented in the Fortinet CLI reference.