Master Dell EMC D-XTR-DY-A-24 Exam with Reliable Practice Questions

Correct : D

The power cables of the XtremIO X1 DAE (Disk Array Enclosure) for X-Brick 1 should be removed during an emergency shutdown procedure. This is a critical step to ensure the safety of the hardware and data integrity in the event of an emergency that requires immediate power down of the system.

The process typically involves:

Identifying the Emergency: Recognize the situation that necessitates an emergency shutdown, such as power surges, environmental hazards, or other immediate risks.

Initiating Emergency Shutdown: Engage the emergency shutdown procedure as outlined in the XtremIO documentation. This may involve using emergency power-off (EPO) switches or other mechanisms designed for rapid shutdown.

Disconnecting Power Cables: Once the system is safely powered down, disconnect the DAE power cables from X-Brick 1. This step helps prevent any electrical damage or data corruption that could occur if power is unexpectedly restored during the emergency.

Ensuring Safety: Verify that all power sources are disconnected and that it is safe to handle the cables and hardware.

Documenting the Procedure: Record the steps taken during the emergency shutdown, including the removal of power cables, to assist in any subsequent investigation or system recovery efforts.

Correct : C

Correct : C

To test the Connect Home functionality using the XtremIO XMCLI, the send-email-notification command can be used. This command is designed to send a test email to verify that the email notification system is properly configured and able to send out alerts.

The process for using this command is as follows:

Access XMCLI: Log into the XtremIO Management Server (XMS) command-line interface (CLI) where you can execute XMCLI commands.

Execute Command: Run the send-email-notification command. This may require additional parameters such as the recipient's email address or the SMTP server details, depending on the system's configuration.

Verify Email Receipt: Check the recipient's email inbox to confirm that the test email was received. This verifies that the Connect Home functionality is operational.

Troubleshoot if Necessary: If the test email is not received, review the system's email configuration settings and check for any errors returned by the command. Make any necessary adjustments and retest.

Consult Documentation: For detailed instructions and troubleshooting steps, refer to the official Dell XtremIO Deploy Achievement document1. This document provides comprehensive guidance on all aspects of managing XtremIO systems, including the use of XMCLI commands for testing Connect Home functionality.

By following these steps and referring to the official documentation, you can ensure that the Connect Home feature of your XtremIO system is properly set up and functioning as expected.

Correct : B

For a customer with an 80 TB database that will not benefit from compression and deduplication, and with no projected future growth, the minimum recommended XtremIO X1 offering would be the one that provides at least 80 TB of raw storage capacity.

Based on the options provided:

A . 20 TB 4 X-Brick model

B . 40 TB 4 X-Brick model

C . 10 TB 8 X-Brick model

D . 20 TB 6 X-Brick model

The most suitable option that meets the requirement of providing at least 80 TB of raw storage capacity would be B. 40 TB 4 X-Brick model. This is because each X-Brick in the XtremIO X1 system contributes to the total raw storage capacity, and with a 4 X-Brick model, each X-Brick would need to provide at least 20 TB to meet the 80 TB requirement. Since the 40 TB 4 X-Brick model offers 40 TB per X-Brick, it would exceed the required capacity, ensuring that the customer's needs are met without any shortfall.

Correct : B

The XtremIO X1 array has a limit on the number of snapshots it can handle due to its physical capacity and the architecture of the storage array. Given that the company requires hourly snapshots for a set of 15 volumes, we need to consider the maximum number of snapshots that the XtremIO X1 array can support.

The calculation for the duration until the system maximum is reached would be based on the maximum number of snapshots supported by the array. Assuming that each snapshot is independent and does not consume additional space due to deduplication, the system can continue to take snapshots until it reaches its maximum capacity.

Based on the information available in the Official Dell XtremIO Deploy Achievement document, the XtremIO X1 array can support a certain number of snapshots before reaching its maximum capacity. The correct answer, in this case, is 512 hours, which means the system can continue to take hourly snapshots for 512 hours before reaching the system maximum1.

For the most accurate and up-to-date information, please refer to the latest Official Dell XtremIO Deploy Achievement documents or consult with Dell support.