SIMULATION
28:-
Correct : A
R1
config
flow exporter Export-NetFlowENCOR
transport udp 2055
ip sla schedule 100 life forever start-time now
wr
Sw1
monitor session 11 source interface e0/2
monitor session 11 destination interface et1/1
wr
OR
OR
Start a Discussions
SIMULATION
29:-
Correct : A
router bgp 10
bgp router-id 10.1.1.111
no bgp defa ipv4-unicast
nei 209.165.200.226 remote-as 20
nei 209.165.202.130 remote-as 30
address-family ipv4
neigh 209.165.200.226 activate
neigh 209.165.202.130 activate
network 10.1.1.10 mask 255.255.255.255
network 209.165.201.10 mask 255.255.255.255
network 209.165.201.20 mask 255.255.255.255
wr
Start a Discussions
SIMULATION
30:-
Correct : A
R22
int tun0
vrf forwarding FINANCE
ip add 10.10.10.2 255.255.255.0
tunn source e0/0
tunnel dest 209.165.200.230
no shut
ip route vrf FINANCE 10.10.111.0 255.255.255.0 tunn0
int et0/1
vrf forwarding FINANCE
ip address 10.22.22.1 255.255.255.252
wr
Verification:-
OR
Start a Discussions
SIMULATION
31:-
OR
OR
OR
Correct : A
Solution:-
wr
Start a Discussions
SIMULATION
32:-
Correct : A
Solution:-
Default int range et0/0-1
Int range e0/0 -- 1
Sw trunk encap dot1
Switch mode trunk
Channel-group 2 mode passive
No shut
Spanning-tree vlan 10 priority 0
Spanning-tree vlan 30 priority 0
Start a Discussions