Cisco 300-620 Exam Questions - Real Practice Questions for Guaranteed Success

Question 1

A network engineer must integrate VMware vCenter cluster with Cisco ACI. The requirement is for the management traffic of the hypervisors and VM controllers to use the virtual switch associated with the Cisco Application Policy. The EPG called "Vmware-MGMT" with VLAN 300 has been created for this purpose. Which set of steps must be taken to complete the configuration?

AAdd VLAN 300 with static allocation to the VLAN POOL that is used for VMM integration.
Attach the VMM domain to the target EPG with resolution preprovision, mode static, untagged access VLAN, and Port-Encap 300.

BAssociate the target EPG with the VMM domain with default settings.
Enable Infrastructure VLAN on AAEP used toward VMware hypervisors.

CEnable Infrastructure VLAN on AAEP used toward VMware hypervisors.
Associate the target EPG with the VMM domain with default settings.

DEnable Infrastructure VLAN on AAEP used toward VMware hypervisors.
Create a static binding in the target EPG toward VMware hypervisors with VLAN 300, untagged access VLAN, and Untagged 802.1P mode.

Correct : A

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

BAssociate the target EPG with the VMM domain with default settings.
Enable Infrastructure VLAN on AAEP used toward VMware hypervisors.

CEnable Infrastructure VLAN on AAEP used toward VMware hypervisors.
Associate the target EPG with the VMM domain with default settings.

DEnable Infrastructure VLAN on AAEP used toward VMware hypervisors.
Create a static binding in the target EPG toward VMware hypervisors with VLAN 300, untagged access VLAN, and Untagged 802.1P mode.

0 / 1500

Question 2

Refer to the exhibit.

Refer to the exhibit. A Cisco ACI fabric displays this fault. Which set of actions modifies the event to be displayed as a warning in the future?

ANavigate to the ACI Events tab.
Create a new record.

BNavigate to the ACI Fault tab.
Create a new record.

CNavigate to the ACI Events tab.
Change the severity level.

DNavigate to the ACI Fault tab.
Change the severity level.

Correct : C

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

ANavigate to the ACI Events tab.
Create a new record.

BNavigate to the ACI Fault tab.
Create a new record.

CNavigate to the ACI Events tab.
Change the severity level.

DNavigate to the ACI Fault tab.
Change the severity level.

0 / 1500

Question 3

A bridge domain for a new endpoint group in the Cisco ACI fabric must meet these requirements:

The bridge domain must function as the default gateway for the subnet so that routing remains within the Cisco ACI fabric.

ARP requests must be managed via Layer 3 unicast packets or be dropped to reduce excessive broadcast traffic.

The impact of misconfigured virtual machines must be kept to a minimum by preventing IP addresses outside of the configured subnet from being routed.

Which set of actions must be taken?

ADisable ARP Flooding.
Enable Limit IP Learning to Subnet.
Enable Unicast Routing on the bridge domain and configure a subnet.

BEnable Limit IP Learning to Subnet.
Enable Unicast Routing on the bridge domain and configure a subnet.
Set Multi-Destination Flooding to Flood in BD.

CSet Endpoint Retention Policy to default.
Enable ARP Flooding.
Enable Unicast Routing on the bridge domain and configure a subnet.

DEnable Unicast Routing on the bridge domain and configure a subnet.
Set L2 Unknown Unicast to Flood.
Disable Endpoint Retention Policy.

Correct : D

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

ADisable ARP Flooding.
Enable Limit IP Learning to Subnet.
Enable Unicast Routing on the bridge domain and configure a subnet.

BEnable Limit IP Learning to Subnet.
Enable Unicast Routing on the bridge domain and configure a subnet.
Set Multi-Destination Flooding to Flood in BD.

CSet Endpoint Retention Policy to default.
Enable ARP Flooding.
Enable Unicast Routing on the bridge domain and configure a subnet.

DEnable Unicast Routing on the bridge domain and configure a subnet.
Set L2 Unknown Unicast to Flood.
Disable Endpoint Retention Policy.

0 / 1500

Question 4

An engineer configures a one-armed policy-based redirect service Insertion for an unmanaged firewall. The engineer configures these Cisco ACI objects:

a contract named All_Traffic_Allowed

a Layer 4 to Layer 7 device named FW-Device

a policy-based redirect policy named FW-1Arm-Policy-Based RedirectPolicy

Which configuration set redirects the traffic to the firewall?

AConfigure a policy-based redirect subject.
Associate the policy-based redirect subject with All_Traffic_Allowed.

BConfigure a firewall bridge domain.
Associate the bridge domain with FW-Device.

CConfigure a device interface policy.
Associate the device interface policy with FW-Device.

DConfigure a service graph.
Associate the service graph with All_Traffic_Allowed.

Correct : D

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AConfigure a policy-based redirect subject.
Associate the policy-based redirect subject with All_Traffic_Allowed.

BConfigure a firewall bridge domain.
Associate the bridge domain with FW-Device.

CConfigure a device interface policy.
Associate the device interface policy with FW-Device.

DConfigure a service graph.
Associate the service graph with All_Traffic_Allowed.

0 / 1500

Master Cisco 300-620 Exam with Reliable Practice Questions

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users: