Master Arcitura Education S90.20 Exam with Reliable Practice Questions

Page: 1 out of Viewing questions 1-5 out of 30 questions

Last exam update: Nov 12,2024

Upgrade to Premium

Question 1

Service Consumer A sends a request message with an authentication token to Service A, but before the message reaches Service A, it is intercepted by Service Agent A (1). Service Agent A validates the security credentials and also validates whether the message is compliant with Security Policy A .If either validation fails, Service Agent A rejects the request message and writes an error log to Database A (2A). If both validations succeed, the request message is sent to Service A (2B). Service A retrieves additional data from a legacy system (3) and then submits a request message to Service B Before arriving at Service B, the request message is intercepted by Service Agent B (4) which validates its compliance with Security Policy SIB then Service Agent C (5) which validates its compliance with Security Policy B .If either of these validations fails, an error message is sent back to Service A .that then forwards it to Service Agent A so that it the error can be logged in Database A (2A). If both validations succeed, the request message is sent to Service B (6). Service B subsequently stores the data from the message in Database B (7). Service A and Service Agent A reside in Service Inventory A .Service B and Service Agents B and C reside in Service Inventory B .Security Policy SIB is used by all services that reside in Service Inventory B .Service B can also be invoked by other service from within Service Inventory B .Request messages sent by these service consumers must also be compliant with Security Policies SIB and B .New services are being planned for Service Inventory A .To accommodate service inventory-wide security requirements, a new security policy (Security Policy SIA) has been created. Compliance to Security Policy SIA will be required by all services within Service Inventory A .Some parts of Security Policy A and Security Policy SIB are redundant with Security Policy SIA .How can the Policy Centralization pattern be correctly applied to Service Inventory A without changing the message exchange requirements of the service composition?

AThe parts of Security Policy A and Security Policy SIB that are redundant with Security Policy SIA are removed so that there is no overlap among these three security policies. A new service agent is introduced into Service Inventory A to validate compliance to the new Security Policy SIA prior to messages being validated by Service Agent A .Another new service agent is introduced into Service Inventory B to validate compliance to the new Security Policy SIA prior to messages being validated by Service Agents B and C .

BThe parts of Security Policy A that are redundant with Security Policy SIA are removed so that there is no overlap between these two security policies. A new service agent is introduced into Service Inventory A to validate compliance to the new Security Policy SIA prior to messages being validated by Service Agent A .

CThe parts of Security Policy A and Security Policy SIB that are redundant with Security Policy SIA are removed so that there is no overlap among these three security policies. Service Agent A is updated so that it can validate messages for compliance with both Security Policy A and Security Policy SIA .Service Agent B is updated so that it can validate messages for compliance with both Security Policy SIA and Security Policy SIB .Service Agent C remains unchanged.

DDue to the amount of overlap among Security Policy A, Security Policy SIA, and Security Policy SIB, the Policy Centralization pattern cannot be correctly applied without changing the message exchange requirements of the service composition.

Correct : B

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

0 / 1500

Question 2

Service Consumer A sends a request message to Service A (1), after which Service A sends a request message with security credentials to Service B (2). Service B authenticates the request and, if the authentication is successful, writes data from the request message into Database B (3). Service B then sends a request message to Service C (4), which is not required to issue a response message. Service B then sends a response message back to Service A (5). After processing Service B's response, Service A sends another request message with security credentials to Service B (6). After successfully authenticating this second request message from Service A, Service B sends a request message to Service D (7). Service D is also not required to issue a response message. Finally, Service B sends a response message to Service A (8), after which Service A records the response message contents in Database A (9) before sending its own response message to Service Consumer A (10). To use Service A, Service Consumer A is charged a per usage fee. The owner of Service Consumer A has filed a complaint with the owner of Service A, stating that the bills that have been issued are for more usage of Service A than Service Consumer A actually used. Additionally, it has been discovered that malicious intermediaries are intercepting and modifying messages being sent from Service B to Services C and D .Because Services C and D do not issue response messages, the resulting errors and problems were not reported back to Service B .Which of the following statements describes a solution that correctly addresses these problems?

AThe Data Confidentiality and Data Origin Authentication patterns need to be applied in order to establish message-layer-confidentiality and integrity for messages sent to Services C and D .The Direct Authentication pattern can be applied to require that service consumer be authenticated in order to use Service A .

BMessages sent to Services C and D must be protected using transport-layer encryption in order to ensure data confidentiality. Service consumers of Service A must be authenticated using X.509 certificates because they can be reused for several request messages.

CApply the Service Perimeter Guard and the Message Screening patterns together to establish a perimeter service between Service Consumer A and Service A .The perimeter service screens and authenticates incoming request messages from Service Consumer A .After successful authentication, the perimeter service generates a signed SAML assertion that is used by the subsequent services to authenticate and authorize the request message and is also carried forward as the security credential included in messages sent to Services C and D .

DApply the Brokered Authentication to establish an authentication broker between Service Consumer A and Service A that can carry out the Kerberos authentication protocol. Before invoking Service A, Service Consumer A must request a ticket granting ticket and then it must request service granting tickets to all services in the service composition, including Services C and D .Messages sent by Service B to Services C and D must further be encrypted with the public key of Service Consumer A .

Correct : A

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

0 / 1500

Question 3

Services A, B, and C reside in Service Inventory A and Services D, E, and F reside in Service Inventory B .Service B is an authentication broker that issues WS-Trust based SAML tokens to Services A and C upon receiving security credentials from Services A and C .Service E is an authentication broker that issues WS-Trust based SAML tokens to Services D and F upon receiving security credentials from Services D and E .Service B uses the Service Inventory A identify store to validate the security credentials of Services A and C .Service E uses the Service Inventory B identity store to validate the security credentials of Services D and F .It is decided to use Service E as the sole authentication broker for all services in Service Inventories A and B .Service B is kept as a secondary authentication broker for load balancing purposes. Specifically, it is to be used for situations where authentication requests are expected to be extra time consuming in order to limit the performance burden on Service E .Even though Service B has all the necessary functionality to fulfill this new responsibility, only Service E can issue SAML tokens to other services. How can these architectures be modified to support these new requirements?

AWhen time consuming authentication requests are identified, Service E can forward them to Service B .Upon performing the authentication, Service B sends its own signed SAML token to Service E .Because Service E trusts Service B .it can use the Service B-specific SAML token to issue an official SAML token that is then sent to the original service consumer (that requested authentication) and further used by other services.

BTo provide load balancing, a service agent needs to be implemented to intercept all incoming requests to Service E .The-service agent uses a random distribution of the authentication requests between Service B and Service E .Because the request messages are distributed in a random manner, the load between the two authentication brokers is balanced.

CBecause both Service B and Service E issue SAML tokens, these tokens are interchangeable. In order for both services to-receive the same amount of authentication requests, a shared key needs to be provided to them for signing the SAML tokens. By signing the SAML tokens with the same key, the SAML tokens generated by Service B cannot be distinguished from the SAML tokens generated by Service E .

DBecause the federation requirements ask for SAML tokens generated by Service E, Service B cannot function as an-authentication broker. To address the load balancing requirement, a new utility service needs to be introduced to provide functionality that is redundant with Service E .This essentially establishes a secondary authentication broker to which Service E can defer time-consuming authentication tasks at runtime.

Correct : B

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

0 / 1500

Question 4

Service Consumer A sends a request message to Service A (1), after which Service A sends a request message to Service B (2). Service B forwards the message to have its contents calculated by Service C (3). After receiving the results of the calculations via a response message from Service C (4), Service B then requests additional data by sending a request message to Service D (5). Service D retrieves the necessary data from Database A (6), formats it into an XML document, and sends the response message containing the XML-formatted data to Service B (7). Service B appends this XML document with the calculation results received from Service C, and then records the entire contents of the XML document into Database B (8). Finally, Service B sends a response message to Service A (9) and Service A sends a response message to Service Consumer A (10). Services A, B and D are agnostic services that belong to Organization A and are also being reused in other service compositions. Service C is a publicly accessible calculation service that resides outside of the organizational boundary. Database A is a shared database used by other systems within Organization A and Database B is dedicated to exclusive access by Service B .Service B has recently been experiencing a large increase in the volume of incoming request messages. It has been determined that most of these request messages were auto-generated and not legitimate. As a result, there is a strong suspicion that the request messages originated from an attacker attempting to carry out denial-of-service attacks on Service B .Additionally, several of the response messages that have been sent to Service A from Service B contained URI references to external XML schemas that would need to be downloaded in order to parse the message data. It has been confirmed that these external URI references originated with data sent to Service B by Service C .The XML parser currently being used by Service A is configured to download any required XML schemas by default. This configuration cannot be changed. What steps can be taken to improve the service composition architecture in order to avoid future denial-of-service attacks against Service B and to further protect Service A from data access-oriented attacks?

AApply the Data Origin Authentication pattern so that Service B can verify that request messages that claim to have been sent by Service A actually did originate from Service A .Apply-the Message Screening pattern to add logic to Service A so that it can verify that external URIs in response messages from Service B refer to trusted sources.

BApply the Service Perimeter Guard pattern to establish a perimeter service between Service B and Service C .Apply the-Brokered Authentication pattern by turning the perimeter service into an authentication broker that is capable of ensuring that only legitimate response messages are being sent to Service C from Service B Further apply the Data Origin Authentication pattern to enable the perimeter service to verify that messages that claim to have been sent by Service C actually originated from Service C .Apply the Message Screening pattern to add logic to the perimeter service to also verify that URIs in request messages are validated against a list of permitted URIs from where XML schema downloads have been pre-approved.

CApply the Service Perimeter Guard pattern and the Message Screening pattern together to establish a service perimeter guard that can filter response messages from Service C before they reach Services A and B .The filtering rules are based on the IP address of Service C .If a request message originates from an IP address not listed as one of the IP addresses associated with Service C .then the response message is rejected.

DApply the Direct Authentication pattern so that Service C is required to provide security credentials, such as Username tokens, with any response messages it sends to Service B .Furthermore, add logic to Service A so that it can validate security credentials passed to it via response messages from Service B .by using an identity store that is shared by Services A and B .

Correct : A

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

0 / 1500

Question 5

Service A exchanges messages with Service B multiple times during the same runtime service activity. Communication between Services A and B has been secured using transport-layer security. With each service request message sent to Service B (1A .IB), Service A includes an X.509 certificate, signed by an external Certificate Authority (CA). Service B validates the certificate by retrieving the public key of the CA (2A .2B) and verifying the digital signature of the X.509 certificate. Service B then performs a certificate revocation check against a separate external CA repository (3A, 3B). No intermediary service agents reside between Service A and Service B .Service B has recently suffered from poor runtime performance plus it has been the victim of an access-oriented attack. As a result, its security architecture must be changed to fulfill the following new requirements:

1. The performance of security-related processing carried out by Service B when communicating with Service A must be improved.

2. All request messages sent from Service A to Service B must be screened to ensure that they do not contain malicious content. Which of the following statements describes a solution that fulfills these requirements?

AEliminate the need to retrieve the public key from the Certificate Authority and to verify the certificate revocation information by extending the service contract of Service B to accept certificates only from pre-registered Certificate Authorities. This form of pre-registration ensures that Service B has the public key of the corresponding Certificate Authority.

BAdd a service agent to screen messages sent from Service A to Service B .The service agent can reject any message containing malicious content so that only verified messages are passed through to Service B .Instead of using X.509 certificates, use WS-Secure Conversation sessions. Service A can request a Security Context Token (SCT) from a Security Token Service and use the derived keys from the session key to secure communication with Service B .Service B retrieves the session key from the Security Token Service.

CApply the Trusted Subsystem pattern by introducing a new utility service between Service A and Service B .When Service A sends request messages, the utility service verifies the provided credentials and creates a customized security profile for Service A .The security profile contains authentication and access control statements that are then inherited by all subsequent request messages issued by Service A .As a result, performance is improved because Service A does not need to resubmit any additional credentials during subsequent message exchanged as part of the same runtime service activity. Furthermore, the utility service performs message screening logic to filter out malicious content.

DApply the Trusted Subsystem pattern to by introducing a new utility service. Because Service B is required to limit the use of external resources. Service A must ensure that no other services can request processing from Service B in order to prevent malicious content from infiltrating messages. This is achieved by creating a dedicated replica of Service B to be used by the utility service only. Upon receiving the request message and the accompanying security credentials from Service A .the utility service verifies the authentication information and the validity of the X.509 signature. If the authentication information is correct, then the utility service replicates the code of Service B, performs the necessary processing, and returns the response to Service A .

Correct : B

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

0 / 1500